Tapering In Gas Jets Increases The Efficiency Of 10-GeV Class Laser Plasma Accelerators – Physical Sciences Area

Skip to main content

About Us
Research
- Experiments & Projects
- Capabilities
News
Work with Us
PSA Internal

About Us
Research
- Experiments & Projects
- Capabilities
News
Work with Us
PSA Internal

(a) Gas jet density measurement setup. The phase offset of the probe beam (∼3 cm diameter) after it passes through the gas plume was measured using a wavefront sensor. (b) Example microscope image of gas jet throat used for width measurements. (c) Raw phase data measured from a representative shot. A 3D model of a small section of the 30 cm elliptical gas jet is shown in (d). Image courtesy of the ATAP Division

Article
ATAP

Tags:

ATAP

Links

About Us
Research
News
Work with Us

Contact Us

Contact

Connect

Our Organization

Lawrence Berkeley National Laboratory
- Physical Sciences Area