Skip to main content

Tag: Engineering Division

Building ATLAS: Bringing Science to Life

Mechanical Technician Marcos Toledo McGee lifts a component of the ATLAS Detector carbon fiber cylinder into place in the Engineering Division’s shop facility. (Credit: Thor Swift, Berkeley Lab)

The Power of Protection: Berkeley Lab’s Flood and Leak Prevention Program

Tom Lipton, an Engineering Technical Manager in the Engineering Division, performs a water inspection in building 50B on the Berkeley Lab campus. (Credit: Allison Barker, Berkeley Lab)

Building ATLAS: A dedicated partnership

The ATLAS Pixel Support Tube builders and fabricators, photographed next to the Pixel Support Tube, in the Engineering Division's Mechanical Fabrication Shops (April 24, 2026) - Credit: Thor Swift, Berkeley Lab

Shaping the Future of Particle Accelerators and Colliders

ATAP researchers Lucas Brouwer (left) and Yufan Yan examine prototypes of ecliptic aperture canted-cosine-theta magnets, capable of producing dipole or quadrupole magnetic fields. (Credit: Robinson Kuntz, Berkeley Lab)

Revolutionizing High-Power Lasers: ATAP and Engineering Divisions Launch the Berkeley Advanced Laser Group

Tong Zhou, Qiang Du, Siyun Chen, and Dan Wang work on the spectral combining of multiple fiber lasers in the fiber laser lab. (Credit: Paul Mueller, Berkeley Lab)

Assembling the Iris prototype robot for Spec-S5

Berkeley Lab's Engineering Division is developing Iris, a new fiber-positioning robot prototype for DESI's upgrade to 'Spec-S5.' (Credit: Ella Minton and Allison Barker, Berkeley Lab)

Introducing Iris, Berkeley Lab's prototype fiber-positioning robot for Spec-S5

Berkeley Lab's Engineering Division is developing Iris, a new fiber-positioning robot prototype for DESI's upgrade to 'Spec-S5.'

From the US Navy to Engineering Division Deputy of Operations: Mike Barry retires after 29 years of service at Berkeley Lab

Mike Barry

Made in Berkeley Lab: Winding a Novel Closed-Loop Coil Magnet Structure

A close-up of the closed-loop coil for the MARS-D magnet during production. The niobium-titanium (Nb-Ti) superconducting wire is shown wrapped around a series of 90-degree corners. (Credit: Lianrong Xu, Berkeley Lab)

Two Engineering Division Employees Make a Big Impact Through Mentoring and Volunteering

Software engineer Mary Lopez (left) and electronics engineer Rebecca Carney (right) with their awards at the 2026 Volunteer and Mentor Appreciation Event. (Photo Credits: Thor Swift, Berkeley Lab)

Meet Director’s Award Recipient, Runaround Champion, and Mechanical Engineer Jennifer Doyle

Jennifer Doyle with a magnet for the High-Luminosity Large Hadron Collider Accelerator Upgrade Project. (Credit: Robinson Kuntz, Berkeley Lab)

Data from Proton and Ion Targets Offers Synergies to Probe Meson Structure

Photoproduction of the ρ’ meson can occur on either proton or heavy (lead) nuclei. The two possibilities lead to the same 4-pion mass spectrum. (Credit: Neha Devi et al)

Connect

Our Organization